Net Weight: 1.5KG
The Service Light & Airbag Reset Tool is an essential tool for resetting of oil service light,
service warning light, service mileage, service intervals and airbag warning light on European made verhicles.
Functions Once hooked up to the vehicle Data Link Connector (DLC) it can perform the following functions:
• Rset of Oil Service Light
• Reset of Service Warning Light
• Setting of Oil Service Mileage
• Setting of Service Mileage Interval
• Setting of 1st Inspection Interval
• Setting of 2nd Inspection Interval
• Reset of Airbag (Warning Light)
Please refer to the PDF Manual what functions are available and supported on what brands and models.
• Package Contains - Plastic carriage box
• 10 in 1 Service Light/Airbag Reset Tool
• Cable for BMW 20 pin
• Cable for BMW OBD2
• Cable for Citroen OBD2
• Cable for Mercedes 38 pin
• Cable for VW/AUDI 2x2
• Cable for VW/AUDI OBD2
• Cable for Volvo
Workable Model European made verhicles like:
• AUDI
• BMW
• CITROEN
• MERCEDES BENZ
• MINI
• SAAB
• SEAT
• SKODA
• VOLKSWAGEN and VOLVO
SI-Reset Mercedes Benz 38 pin
Net Weight: 0.12KG
Features:
Service Intervall Reset for Mercedes Benz cars with 38 pin connector except ML class
• Resets the Service Indicator (Service Intervall)
• Delete airbag faults (if your airbag warning light is on you can turn it off with this tool, if
the error is not a permanent one)
Operating Instructions:
• Turn ignition on
• Plug tool to 38 pin diagnostic connector of car
• Tool will initialize and led will be red
• Press button of desired operation
• Tool will show green light if the operation was successful
Product Name: SI-Reset BMW OLD
Net Weight: 0.15KG
Workable Model:
BMW build 1982-2001 with 20 pin diagnostic socket located in the engine compartment
Functions:
Reset Inspection and Oil Service
Operating Instructions:
Usage:
• Plug the Device into the 20 pin diagnostic socket of the car located in the engine compartment
• Turn ignition key to enable the board electronic but don`t turn on the motor
• Press the button for the operation you want to perform and keep it pressed
• The LED of the choosen operation will be on
• Keep the button pressed
• Reset is done when the LED is turning off itself
• Release button
On some dashboards there is needed to make a inspection reset before a oil reset
Product Name: SI-Reset BMW&Mini Rover OBD2
Net Weight: 0.12KG
Workable Model:
• BMW
• Mini & Rover 75 cars build after 2001 with OBD2 socket
Functions:
Reset Inspection and Oil Service
Operating Instructions:
Usage:
• Plug the Device into the OBD2 socket of the car
• All LED`s will blink and than stay on
• Turn ignition key to enable the board electronic but don`t turn on the motor
• Press the button for the operation you want to perform shortly
• The LED of the choosen operation will light and the other Led`s will be off
• LED`s will perform a light chain which means reset is done
• On some dashboards there is needed to make a inspection reset before a oil reset
Product Name: SI-Reset VAG OBD2
Net Weight: 0.12KG
Workable Model:
• VW
• AUDI
• FORD
• Seat & Skoda Cars with OBD2 connector (w/o can bus)
Functions:
• Reset Inspection Intervall
• 15.000 km (OIL - STANDARD)
• 30.000 km (Inspection 1 - LONGLIFE)
• 50.000 km (Inspection 2 - LONGLIFE)
Operating Instructions:
Usage:
• Plug the Device into the OBD2 socket of the car
• All LED`s will blink and than stay on
• Turn ignition key to enable the board electronic but don`t turn on the motor
• Press the button for the operation you want to perform shortly
• The LED of the choosen operation will light and the other Led`s will be off
• LED`s will perform a light chain which means reset is done
Product Name: SI Opel Reset OBD2
Net Weight: 0.12KG
Functions:
• Reset Inspection Intervall
• 15.000 km or 1 year
• 15.000 km or 2 years
• 30.000 km or 2 years (LONGLIFE)
Workable Model:
• Opel Astra build after 1998, Zafira build after 1998, Corsa build after 2000
• Operating Instructions
Usage:
• Plug the Device into the OBD2 socket of the car
• All LED`s will blink and than stay on
• Turn ignition key to enable the board electronic but don`t turn on the motor
• Press the button for the operation you want to perform shortly
• The LED of the choosen operation will light and the other Led`s will be off
• LED`s will perform a light chain which means reset is done
No comments:
Post a Comment