Product Name: VAG Commander
Net Weight: 0.30KG
Diagnostic tool for cars from Volkswagen Audi Group which using "KWP2000-CAN TP2.0"
Features:
1.Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools (example is new KESSY unit).
2. Manual definition of running diagnostic session - not like remaining diagnostic tools always standard diagnostic session 0x89
3. Broadcast diagnostic request - disable normal communication, clear DTCs, Logistic (transport) mode,...
4. Allows managing of brand new immobilizer units where is allowed programming of PIN, SKC, BGW, MAC.
5. Most of popular diagnostic requests - identifications, coding, adaptations, DTCs and s.o. Special functions about instrument clusters from VDO which allows - changing of odometer value, reading security access code of immobilizer, reading eeprom and flash memory of instrument cluster.
List of vehicles covered from function odometer change:
Seat Leon (2005+),Toledo(2005+),Altea,Altea XL
VW Jetta(MY2006),Caddy,Golf5,Crossgolf,Touaran,EOS,Individual,Passat platform B6(MY2006)
Skoda Octavia II,Scout,Roomster
Audi A3 (2003+ still with most of these cars odometer change is imposible)
Audi A8 (2003+ still with most of these cars odometer change is imposible)
Near SW update is : Audi A6, Audi Q7, VW Phaeton, Porsche Cayenne (2005+), VW Touareg
List of vehicles covered from function security access code reading:
Seat Leon (2005+),Toledo(2005+),Altea,Altea XL
VW Jetta(MY2006),Caddy,Golf5,Crossgolf,Touaran,EOS,Individual,Passat platform B6(MY2006)
Skoda Octavia II,Scout,Roomster
Audi A3,A8
HEX-USB-CAN VAG-COM for 512.4(VAG380)
Net Weight: 0.15KG
Features:
1. USB connector plugs into most modern laptops!
2. Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8.
3. Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU.
4. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.
5. Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches!
6. Fully backwards compatible with older cars using a single K-line or
K plus L.
7. Bi-Color (red/green) status/activity LED
8. Support HEX-USB-CAN Interface compatible with VAG-COM 512.4
USB KKL VAG-COM for 409.1(VAG580)
Net Weight: 0.13KG
Workable Model
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
• Volkswagen
• Audi
• Skoda
• Seat
Reference Data
1.This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus.
2. Terminal K = Bus of communication
3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
5. This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only.
6. Supported also ISO9141 protocol
7.The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.
HEX-USB-CAN VAG-COM FOR 704(VAG980)
Net Weight: 0.15KG
OBDII CAN-USB V704.1 Full
Compatible with the newest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7,etc.
Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.
Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6,A8,etc.
1.USB connector plugs into most modern laptops!
2.Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8.
3.Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU.
4.Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.
5.Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches!
6.Fully backwards compatible with older cars using a single K-line or K plus L.
7.Bi-Color (red/green) status/activity LED
The product description:
OBDfactory OBDII Can USB with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7.
Protocol timing indistinguishable from a real VAG/VAS tool.
The possibility that software is complete is on the xxxxx renewal, function all of, support the car type to 2007.
Diagnostics Type including:
All Golf-5 platform cars (A5 platform) including:
• 2003+ VW Touran (1T chassis)
• 2004+ VW Golf (1K chassis)
• 2004+ VW Caddy (2K chassis)
• 2004+ Audi A3 (8P chassis)
• 2004+ Seat Altea (5P chassis)
• 2004+ Skoda Octavia (1Z chassis)
• 2005+ Seat Toledo (5P chassis)
• 2005+ Golf Plus (5M chassis)
• 2005+ Seat Leon (1P chassis)
• 2005.5+ Jetta (1K chassis)
• 2006+ Eos (1F chassis)
• 2003+ Audi A8 and A8L (D3 platform, 4E chassis)
• 2005+ Audi A6 (C6 platform, 4F chassis)
• 2005+ Audi A4 ("B7" platform) (some control modules)
• 2005.5+ VW Passat (B6 Platform, 3C chassis)
• 2006+ Audi Q7 (4L chassis)
• 2007+ Audi R8 (42 chassis)
• 2007+ Audi TT (8J chassis)
• 2007+ VW Touareg (7L6 chassis) ("facelift", built after Nov. 30 2006)
No comments:
Post a Comment